Browse all practice questions for the FE Electrical and Computer Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

FE Electrical and Computer Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • To find power loss per meter of length, what is the first step?
  • Which connection type has neutral wire in a three-phase system?
  • In a balanced three-phase system, what happens to the neutral current when the loads are equal?
  • What length of a 60 Hz transmission line is considered long?
  • Which type of fault does a directional relay typically protect against?
  • What equation represents the maximum power-transfer condition?
  • Which of the following prefixes corresponds to 10^12?
  • What unit is commonly used to measure apparent power in electrical systems?
  • In a series circuit, how does the total current relate to the current through each individual component?
  • What is the value of s for a sinusoidal steady-state waveform?
  • Which SI base quantity is measured in kelvin?
  • What is the unit for a solid angle?
  • What is the chemical symbol for copper?
  • What determines the phase relationship in a purely resistive circuit?
  • Which of the following is a primary role of the ALU?
  • What is the magnitude of the line current for a delta connection?
  • What is the mathematical expression for Ohm's law?
  • What is the primary function of a router in networking?
  • How should society be regarded by an ethical professional engineer?
  • What is the formula for three-phase real power (P)?
  • In a BJT circuit, which factor primarily impacts the collector current (IC)?
  • What is the symbol for iron?
  • What is the formula for calculating a decibel of power?
  • What does a higher capacitance value indicate?
  • What is typically required before a program can be executed?
  • What is the relationship between line voltage and phase voltage in a Y-connected load?
  • What is the transfer function representation of a high pass filter?
  • How is a nonlinear relationship characterized graphically?
  • What is the term used for the positive electrode of a battery?
  • What is required to determine the point of inflection of a function?
  • How is a unit vector calculated?
  • What characterizes a bijective function?
  • What type of signal does a demultiplexer handle?
  • What term describes a circuit that has the same current throughout all its elements?
  • Which statement defines a canon in the context of professional ethics?
  • Which of the following metals has the lowest resistivity at 20°C?
  • What is the term for faults that are NOT three-phase symmetrical faults?
  • What kind of field is created by a moving charge?
  • What equation calculates the equivalent capacitance for n capacitors in series?
  • Which of the following describes a characteristic of overdamped systems?
  • What characterizes a bit slice processor?
  • What is the worst-case scenario for the number of comparisons needed in an insertion sort?
  • Which unit represents luminous flux?
  • What term describes a circuit that has the same voltage across all its elements?
  • In calculating equivalent values, what does the symbol G represent?
  • What is the formula for the impedance of an inductor in the s-domain?
  • Which of the following methods does NOT alter the address before it is used?
  • What is the formula for calculating Thevenin or Norton equivalent resistance?
  • What is the unit for illuminance?
  • What does the term "injective" refer to in mathematical functions?
  • What is indicated at the beginning of every flat part in a Bode plot?
  • What is the impedance angle of an inductor?
  • What is the power of 10 associated with the prefix "tera" (T)?
  • What term describes the condition in which capacitive reactance equals inductive reactance?
  • How is the equivalent inductance for n inductors in series calculated?
  • Which of the following properties is characteristic of a short circuit?
  • What is voltage regulation generally expressed as?
  • How do interrupts function in a computer system?
  • Which type of battery cannot be recharged?
  • What is the formula for voltage regulation?
  • What unit is used to describe luminous intensity?
  • What is the unit of measure for a battery cycle?
  • What is the impedance angle of a capacitor?
  • What type of protection relay is used to compare currents and protect the zones of an electrical system?
  • What term describes a node connecting three or more circuit elements?
  • In a three-phase system with perfectly balanced loads, what is the neutral current?
  • What is the behavior of a JK flip-flop when both J and K are set to 1?
  • In professional ethics, what is meant by the term "canon"?
  • What type of communication is characterized as full duplex?
  • For critically damped systems, what is true regarding the damping ratio?
  • What does Gauss's law state about total electric flux?
  • What is the chemical symbol for germanium?
  • What is the formula for calculating risk?
  • When given three angles and one side, what method is used to find other sides?
  • What is the formula for the average energy stored in an inductor?
  • What signifies an open-circuit condition in terms of current and voltage?
  • When calculating the power loss in a conductor, which equation is used?
  • In a Y-Y source/load configuration, how do phase current, line current, and load current relate to each other?
  • Which of the following describes the location of poles on a Bode plot?
  • Which relay is specifically designed to operate based on uneven current distribution?
  • What is the phase shift between current and voltage in a purely resistive circuit?
  • What is the value of s for a damped sinusoid?
  • Which circuit element is known for storing magnetic energy?
  • How many comparisons does a bubble sort typically require for n elements?
  • What is the unit for magnetic flux?
  • In the context of mappings, what does inverse mapping mean?
  • Which circuit element is responsible for storing electric energy?
  • Which protocols operate at the transport layer of the OSI model?
  • What is the formula for the phase current of a delta winding?
  • Which of the following is true regarding three-phase systems?
  • Which equation provides the amount of energy stored in an inductor?
  • What is a consequence of an ethics violation for a professional?
  • How is Thevenin equivalent resistance determined in a circuit?
  • In the method for finding roots of a quadratic equation, what is the form of the equation used?
  • What is the formula for three-phase reactive power?
  • The technique of modifying the address in memory would help primarily in which application?
  • What is the meaning of the term "surjective" in the context of functions?
  • How is the pay-back period calculated?
  • What is the primary purpose of a demultiplexer?
  • What represents the total power in an AC circuit?
  • What is the value of s for an exponential waveform?
  • What is the power of 10 associated with the prefix "nano"?
  • Which characteristic is unique to an injective function?
  • What is the mathematical expression for the average value of a rectified voltage sinusoid?
  • What does the unit 'weber' measure?
  • Which SI base quantity corresponds to the unit 'second'?
  • In the context of functions, what does surjective mean?
  • Which circuit element stores energy in an electric field?
  • What does the photoelectric effect refer to?
  • What can happen to a professional who violates rules of conduct?
  • What is the primary purpose of indirect addressing?
  • In a Y-connected circuit, how does the magnitude of each line current compare to the corresponding phase current?
  • What is defined as the ratio of induced voltage to change in flux linkage?
  • What does UDP stand for in network communications?
  • What does the acronym NESC stand for?
  • What term describes a compound that conducts electricity when dissolved in water?
  • What is the result of the characteristic equation for critically damped systems?
  • What is a drawback of having no statute of limitations?
  • What type of three-phase connection exists if the line current equals the phase current?
  • Which form of authentication is defined by NIST?
  • Which unit is not a measure of flux?
  • What is equivalent uniform annual cost?
  • What is the formula for the impedance of an inductor?
  • Which parameter affects the frequency of an AC signal?
  • What is the formula for capacitive reactance, XC?
  • What is the value of the elementary charge?
  • What is a potential effect of the skin effect in conductors?
  • In terms of conducting electricity, what classification is assigned to a dielectric material?
  • What defines a parallel interface?
  • What does the prefix "giga" signify in terms of powers of ten?
  • In data transmission, what is a characteristic of Time Division Multiplexing?
  • In law, what is a tort?
  • What distinguishes a fuel cell from a battery?
  • What is the formula to calculate input power in terms of torque?
  • In immediate addressing, how is the data in the address field used?
  • In n years at effective interest rate i, what is the present worth formula, P?
  • What happens to the total power in a three-phase system if one phase becomes unbalanced?
  • What is the atomic mass, in atomic mass units (amu), of 12vC?
  • What best describes the role of a special-purpose register in indexed addressing?
  • According to Lenz's law, the direction of the induced electromotive force (emf) will be?
  • What defines a simplex channel in data transmission?
  • Which sorting algorithm typically achieves a performance of n log n?
  • What is the abbreviation for the unit liter?
  • Which circuit element is associated with a positive phase-angle difference?
  • Which circuit element is associated with a negative phase-angle difference?
  • What is a primary consideration in professional ethics?
  • What SI unit measures electric current?
  • What is the advantage of using indexed addressing in programming?
  • Which of the following represents the gain of a system in Z-transform?
  • What does a D flip-flop do?
  • Which of the following represents the SI unit for length?
  • What is the formula for total power in a three-phase circuit?
  • What is the value of s for a DC waveform?
  • What unit is equivalent to C/s?
  • What is the impact of increasing the power factor in a system?
  • What power of 10 is associated with the prefix "giga" (G)?
  • What is the full name of the professional society known as ASME?
  • What is the formula for three-phase apparent power?
  • What is the primary characteristic of a half duplex communication system?
  • What is the chemical symbol for aluminum?
  • What type of circuit element opposes rates of change of voltage?
  • What type of three-phase connection exists if the line voltage equals the phase voltage?
  • What is the significance of understanding inverse mappings in functions?
  • Which equation represents the total energy stored in a capacitor?
  • What is the function of hashing in data management?
  • What does the capacitive reactance (XC) depend on?
  • In a delta-connected source driving a delta-connected load, what is true about the voltages?
  • What does a constant load power indicate in terms of energy conversion?
  • What is the relationship defined by Ohm's Law?
  • If the current through an inductor increases, what happens to the induced voltage?
  • What is the standard approach for minimal POS?
  • What is a direct outcome of having a function that is both injective and surjective?
  • What does voltage regulation describe in an electrical system?
  • What is the formula for the average energy stored in a capacitor?
  • What is the equation for the impedance of a capacitor?
  • What is the SI unit for mass?
  • In terms of phase relationships, what does a capacitive circuit typically exhibit?
  • What is the statute of limitations in a legal context?
  • What does Joule's law of energy state?
  • In a balanced three-phase system, what is the phase relationship between the phase voltages?
  • Which type of addressing directly uses the data in the address field without modification?
  • What does indexed addressing modify in the address field for memory access?
  • Which method allows for calculating angular speed from frequency?
  • What does ALU stand for in computer architecture?
  • How is power defined in physics?
  • Which component is commonly used to implement a demultiplexer?
  • Which of the following properties is indicative of an open circuit?
  • What is the significance of ethical canons for professional engineers?
  • What does book value represent in financial terms?
  • Which of the following represents the relationship between apparent power, real power, and reactive power?
  • Which sorting algorithm can be described as "elements are ordered by rewriting them in proper sequence"?
  • Which term describes an element that is not a source of energy?
  • What is the first step in solving a differential equation using the general solution method?
  • In a battery, what is the direction of current flow within its internal structure?
  • What is the polar form of Vm sin (ωt + θ)?
  • What is the formula for the power factor?
  • What is the first step to determine Norton equivalent resistance in a circuit?
  • What steps must occur for three-phase systems to be paralleled with minimal transient effects?
  • Which property is true for all resistors in a parallel circuit?
  • What kind of field is created by a static charge?
  • What is the mathematical expression for Joule's law of the heating effect?
  • What is the formula for inductive reactance, XL?
  • What is the dimension of a capacitor's capacitance?
  • In calculating equivalent values, what does the symbol A represent?
  • What unit is equivalent to J/C?
  • What is the formula for the phase voltage of a wye winding?
  • In a delta-connected source feeding a Y-connected load, what is true about the phase voltages?
  • What is the mathematical expression for Ohm's law?
  • What does minimal SOP refer to in digital logic design?
  • What measurement indicates the opposition to current in an AC circuit?
  • What is the formula for calculating a decibel of voltage?
  • What equation gives the equivalent capacitance for capacitors connected in parallel?
  • Which individual or group must an engineer ethically prioritize according to professional standards?
  • What is the chemical symbol for silicon?
  • What type of circuit element opposes rates of change of current?
  • In a Y-connected circuit, how do the phase currents relate to the line currents?
  • What is the relationship between output power and input power considering losses?
  • What is the effect of a 180-degree phase shift in electrical signals?
  • In terms of differential amplifiers, what is the functional expression for the virtual ground at Vn?
  • What condition defines an overdamped system?
  • If the inductive reactance of a given circuit is −Q, what must be done to correct the power factor to a value of 1?
  • What is an interrupt in computer systems?
  • What is the formula for the impedance of a capacitor in the s-domain?
  • What is required of professionals regarding ethical conduct?
  • For an inductor, what does the inductive reactance (XL) increase with?
  • What term describes the open-circuit voltage at the terminals of interest?
  • What is the effect of a negative impedance angle in a circuit?
  • Which process involves sending multiple signals over a common channel using successive time intervals?
  • What equation represents the maximum energy-transfer condition?
  • What is the relationship between primary impedance (Zp) and secondary impedance (Zs) in a transformer?
  • What is the approximate voltage range of a lightning strike?
  • What is a point of inflection in calculus?
  • What does Frequency Division Multiplexing allow?
  • What characteristic defines a packet switched network?
  • What is the gain expression for a differential amplifier when V1 is grounded?
  • What phenomenon causes AC currents to flow near the surface of a conductor?
  • In an underdamped system, how many roots does the characteristic equation have?
  • What type of power is primarily used in the rating of transformers?
  • In a wye connection, how does the line voltage compare to the phase voltage?
  • What length of a 60 Hz transmission line is considered short?
  • What term describes an element that represents distributed properties in a specific location?
  • What is the speed of light in a vacuum?
  • What is breakeven analysis primarily used for?
  • Which law states that the sum of the instantaneous currents flowing toward a point is equal to the sum flowing away from that point?
  • What is the power triangle equation?
  • What are the components of a bit slice processor?
  • In a serial interface, how is data transmitted?
  • Which organization provides certification in reliability engineering?
  • In the context of signal processing, what does the Z-transform primarily facilitate?
  • For a differential amplifier configuration with V1 grounded, how would you express the output voltage (Vo) as a function of the input voltage V2?
  • What is the power of ten associated with the prefix "pico"?
  • What type of battery contains no free or liquid electrolyte?
  • In electrical systems, which component is typically classified as a passive element?
  • Which component in a BJT circuit can determine the base current (IB)?
  • What are the units of magnetic flux density?
  • What is the equation for the complex frequency variable?
  • What is the purpose of RAM in a computer system?
  • Which three parties are essential in the process of getting a project built?
  • What term describes the outflow of electrons into a vacuum from a heated conductor?
  • In a three-phase system, the voltages are separated by how many degrees?
  • What is the effect of connecting capacitors in series?
  • What is the approximate current range of a lightning strike?
  • What effect does increasing resistance have on a circuit while maintaining a constant voltage according to Ohm's law?
  • What device is used in power systems to sense and reduce abnormal current and voltage levels from fault conditions?
  • Which type of protection relay responds to faults to either the left or right of its location?
  • Which of the following is a feature of TCP?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy